LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 996 (Power Window Control System) >> LH & RH Front Window Anti-Pinch >> On-Vehicle Repair >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Using a suitable tool, remove the front door grip cover. Refer to "EXPLODED VIEW ".
    CAUTION: Wrap a cloth around suitable tools to protect components from damage.
  3. Remove the power window main switch locking clip (A).
    Fig 1: Identifying Power Window Main Switch Locking Clip
    G05911137Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Release the metal clip, then lift the power window main switch and finisher as an assembly upward to remove it from the front door finisher.

    Metal clip

    Pawl

  5. Disconnect the harness connector.
  6. Release the tabs on each side, then separate the switch finisher (1) from the power window main switch (2) and remove.
CAUTION: Do not fold the pawl of power window main switch finisher.
Fig 2: Identifying Power Window Main Switch And Finisher
G05911138Courtesy of NISSAN MOTOR CO., U.S.A.


  1. Disconnect the negative battery terminal.
  2. Using a suitable tool, remove the front door grip cover. Refer to "EXPLODED VIEW ".
    CAUTION: Wrap a cloth around suitable tools to protect components from damage.
  3. Remove the power window main switch locking clip (A).
    Fig 1: Identifying Power Window Main Switch Locking Clip
    G05911137Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Release the metal clip, then lift the power window main switch and finisher as an assembly upward to remove it from the front door finisher.

    5. Metal clip

    Pawl

  5. Disconnect the harness connector.
  6. Release the tabs on each side, then separate the switch finisher (1) from the power window main switch (2) and remove.
CAUTION: Do not fold the pawl of power window main switch finisher.
Fig 2: Identifying Power Window Main Switch And Finisher
G05911138Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals