Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The stopping distance on slippery road surfaces might be longer with the ABS operating than when the ABS is not operating.

CHECK FUNCTION

Turn ignition switch OFF and disconnect ABS actuator and electric unit (control unit) connector to deactivate ABS. In this condition, check stopping distance. After inspection, connect connector.

Is the inspection result normal?

YES: GO TO procedure "CHECK WHEEL SENSOR AND SENSOR ROTOR" of symptom. Refer to "DIAGNOSIS PROCEDURE ".

NO: Check brake system.