LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 995 (Brake Control System (VDC/TCS/Abs)) >> On-Vehicle Repair >> G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center console. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the yaw rate/side G sensor connector.
  3. Remove the yaw rate/side G sensor nuts.
    • ←: Front
  4. Remove the yaw rate/side G sensor.
Fig 1: Yaw Rate/Side G Sensor Nuts With Torque Specifications
G04887305Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals