Inspection Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK VDC OFF SWITCH

Turn ignition switch OFF.
Disconnect VDC OFF switch connector.
Check continuity between VDC OFF switch terminals.

TERMINAL CONTINUITY REFERENCE

VDC OFF switch terminals	Condition	Continuity
1 - 2	VDC OFF switch is pressed ON	Yes
1 - 2	VDC OFF switch is pressed OFF	No

Fig 1: Checking Continuity Between VDC OFF Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: Inspection End

NO: Replace VDC OFF switch.