LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 995 (Brake Control System (VDC/TCS/Abs)) >> Component Diagnosis >> VDC Off Indicator Lamp >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VDC OFF SWITCH

    Check that the VDC OFF indicator lamp in the combination meter turns on/off correctly when operating the VDC OFF switch.

    Is the inspection result normal? 

    YES: GO TO 2

    NO: Check VDC OFF switch. Refer to "DIAGNOSIS PROCEDURE ".

  2. CHECK SELF-DIAGNOSIS

    Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to "CONSULT-III FUNCTION (ABS) ".

    Is the inspection result normal? 

    YES: GO TO 3

    NO: Check items displayed by self-diagnosis.

  3. CHECK COMBINATION METER

    Check if the indication and operation of combination meter are normal. Refer to "WORK FLOW ".

    Is the inspection result normal? 

    YES: Replace ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".

    NO: Repair or replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals