Inspection Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PARKING BRAKE SWITCH

Turn ignition switch OFF.
Disconnect parking brake switch connector.
Check continuity between parking brake switch terminal 1 and ground.

TERMINAL CONTINUITY REFERENCE

Component	Terminal	Condition	Continuity
Parking brake switch	1	Parking brake applied	Yes
Parking brake switch	1	Parking brake released	No

Fig 1: Checking Continuity Between Parking Brake Switch Terminal 1 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: Inspection End.

NO: Replace parking brake switch.