Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BRAKE FLUID LEVEL SWITCH

Turn ignition switch OFF.
Disconnect brake fluid level switch connector.
Check continuity between brake fluid level switch terminals 1 and 2.

TERMINAL CONTINUITY REFERENCE

Brake fluid level switch terminals	Condition	Continuity
1 - 2	Brake fluid reservoir full	No
1 - 2	Brake fluid reservoir empty	Yes

Fig 1: Checking Continuity Between Brake Fluid Level Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: Inspection End.

NO: Replace brake fluid level switch. Refer to "DISASSEMBLY AND ASSEMBLY ".