LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 995 (Brake Control System (VDC/TCS/Abs)) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM THE NEUTRAL POSITION ADJUSTMENT FOR THE STEERING ANGLE SENSOR

Perform the neutral position adjustment for the steering angle sensor.

: Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: DESCRIPTION ".

scientia non olet · About LEMON Manuals