Oil Adjusting Procedure for Components Replacement Except Compressor
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
After replacing any of the following major components, add the correct amount of oil to the system.
Adjust the oil quantity according to the following table.
OIL AMOUNT
| Part replaced | Oil to be added to system | Remarks | ||
|---|---|---|---|---|
| Amount of oil ml (US fl oz, Imp fl oz) | ||||
| Evaporator | 75 (2.5, 2.6) | - | ||
| Condenser | 75 (2.5, 2.6) | - | ||
| Liquid tank | 5 (0.2, 0.2) | Add if compressor is not replaced | ||
| In case of refrigerant leak | 30 (1.0, 1.1) | Large leak | ||
| - | Small leak (1) | |||
|
||||