LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 991 (SRS Airbag) >> On-Vehicle Repair >> Crash Zone Sensor >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.
  • Do not use air tools or electric tools for servicing.
  • Replace the crash zone sensor of deployed SRS driver air bag and deployed SRS front passenger air bag.
  • Do not cause impact to the crash zone sensor by dropping etc. Replace the crash zone sensor if it has been dropped or sustained an impact.
Fig 1: Precaution For Handling Crash Zone Sensor
G05224522Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals