LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 990 (Power Supply, Ground & Circuit Elements) >> On-Vehicle Repair >> Battery >> Removal and Installation (Battery Tray) >> Removal

Removal and Installation (Battery Tray): Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove battery and battery tray liner. Refer to "REMOVAL AND INSTALLATION (BATTERY) ".
  2. Remove air cleaner assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove ECM.
  4. Disconnect transmission control module (TCM). Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the ECM bracket.
  6. Remove current sensor from battery tray.
  7. Remove the battery tray bolts and battery tray.
scientia non olet · About LEMON Manuals