How To Read Harness Layout

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

The following Harness Layouts use a map style grid to help locate connectors on the drawings:

Main Harness, Console Sub-harness and Console Switch Sub-harness
Engine Room Harness and Front End Module Harness
Engine Room Harness (Passenger Compartment)
Engine Control Harness and Knock Sensor Sub-harness
Body Harness, LH Front Seat Harness, Tail Harness and Chassis Harness
Body No. 2 Harness, RH Front Seat Harness, Rear Seat Harness, Rear Parcel Shelf Harness and Tail Sub-harness
Room Lamp Harness and Sunroof Sub-harness

Fig 1: Harness Layout (Example)

Courtesy of NISSAN MOTOR CO., U.S.A.

To use the grid reference

Find the desired connector number on the connector list.
Find the grid reference.
On the drawing, find the crossing of the grid reference letter column and number row.
Find the connector number in the crossing zone.
Follow the line (if used) to the connector.