LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (General Information) >> How To Use This Information >> Tightening Torque Of Standard Bolts >> Tightening Torque Table

Tightening Torque Table

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION

Grade Bolt Size Bolt diameter (1) mm Pitch mm Tightening torque (Without lubricant)
Hexagon head bolt Hexagon flange bolt
N.m kg-m ft-lb in-lb N.m kg-m ft-lb in-lb
4T M6 6.0 1.0 5.5 0.56 4 49 7 0.71 5 62
M8 8.0 1.25 13.5 1.4 10 - 17 1.7 13 -
1.0 13.5 1.4 10 - 17 1.7 13 -
M10 10.0 1.5 28 2.9 21 - 35 3.6 26 -
1.25 28 2.9 21 - 35 3.6 26 -
M12 12.0 1.75 45 4.6 33 - 55 5.6 41 -
1.25 45 4.6 33 - 65 6.6 48 -
M14 14.0 1.5 80 8.2 59 - 100 10 74 -
7T M6 6.0 1.0 9 0.92 7 80 11 1.1 8 97
M8 8.0 1.25 22 2.2 16 - 28 2.9 21 -
1.0 22 2.2 16 - 28 2.9 21 -
M10 10.0 1.5 45 4.6 33 - 55 5.6 41 -
1.25 45 4.6 33 - 55 5.6 41 -
M12 12.0 1.75 80 8.2 59 - 100 10 74 -
1.25 80 8.2 59 - 100 10 74 -
M14 14.0 1.5 130 13 96 - 170 17 125 -
9T M6 6.0 1.0 11 1.1 8 - 13.5 1.4 10 -
M8 8.0 1.25 28 2.9 21 - 35 3.6 26 -
1.0 28 2.9 21 - 35 3.6 26 -
M10 10.0 1.5 55 5.6 41 - 80 8.2 59 -
1.25 55 5.6 41 - 80 8.2 59 -
M12 12.0 1.75 100 10 74 - 130 13 96 -
1.25 100 10 74 - 130 13 96 -
M14 14.0 1.5 170 17 125 - 210 21 155 -
(1) Nominal diameter
  1. Special parts are excluded. 
  2. This standard is applicable to bolts having the following marks embossed on the bolt head. 
Fig 1: Standard Bolt Specification Chart
G04874673Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals