Rear Wheel Bearing

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Check that the axial end play is within specification.
Axial end play: 0.1 mm (0.004 in) or less
Check that the wheel hub bearings operate smoothly.
Replace the wheel hub assembly if the axial end play is not within specification or the wheel hub assembly does not turn smoothly. Refer to "REMOVAL AND INSTALLATION ".

Fig 1: Identifying Dial Gauge

Courtesy of NISSAN MOTOR CO., U.S.A.