Lower Ball Joint
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of NISSAN MOTOR CO., U.S.A. LOWER BALL JOINT SPECIFICATION
| Swinging force "A" (Measuring point: cotter pin hole of ball stud) N (kg-f, lb-f) |
7.8 - 54.9 (0.8 - 5.6, 1.8 - 12.3) |
| Turning torque "B" N.m (kg-cm, in-lb) |
0.49 - 3.43 (5.0 - 35.0, 4.3 - 30.4) |
| Vertical end play "C" mm (in) |
0 (0) |