Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

After installation, check that the front wheel alignment is within specification. Refer to "FRONT WHEEL ALIGNMENT ".
When installing the strut spacer, it must be positioned as shown.

Fig 1: Identifying Upper Spring Seat, Strut Mount Insulator And Strut Spacer
Courtesy of NISSAN MOTOR CO., U.S.A.
Tighten all nuts and bolts to specification. Refer to "COMPONENTS ".
WARNING:
- Always replace the shock absorber (strut) lower mounting nuts.
- When installing shock absorber (strut) to steering knuckle, be sure to hold bolts when tightening nuts.
Install wheel and tire. Refer to "TIRE ROTATION ".