LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 943 (Lighting System) >> Headlamp (For USA) >> Removal and Installation >> Combination Lamp >> Removal

Combination Lamp: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure lighting switch is OFF.
  2. Disconnect negative battery cable.
  3. Remove the front fascia. Refer to "FRONT BUMPER ".
  4. Remove the combination lamp bolts.
  5. Pull combination lamp toward the front of the vehicle, disconnect connector and remove from vehicle.
    Fig 1: Identifying Combination Lamp Bolts
    G04917830Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals