LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Brake System) >> Rear Disc Brake >> Removal and Installation of Brake Pad >> Removal

Removal and Installation of Brake Pad: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire using power tool.
  2. Remove bottom sliding pin.
  3. Hang cylinder body with a wire, and remove pads, pad retainers, shims from torque member.
scientia non olet · About LEMON Manuals