LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Power Steering System) >> Power Steering Gear And Linkage >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Use soft jaws when holding steering gear housing. Handle gear housing carefully, as it is made of aluminum. Do not grip cylinder in a vise.
  • Do not disassemble steering gear.
  • Do not disassemble outer tie-rod.
  1. Remove the outer tie-rod sockets.
  2. Remove the inner tie-rod sockets and dust boots.
  3. Remove fluid tubes.
scientia non olet · About LEMON Manuals