Inspection Procedure
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTOR
- Turn ignition switch OFF, disconnect the ABS actuator and electric unit (control unit) connector, and check the terminals for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminal.
- Reconnect connector to perform self-diagnosis.
Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?
YES: Print out the self-diagnosis results, and refer to "TROUBLE DIAGNOSIS ".
NO: Connector terminal connection is loose, damaged, open, or shorted.