LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 934 (Body, Lock & Security System) >> Trunk Lid And Fuel Filler Lid Opener >> Removal and Installation of Trunk Lid Lock >> Striker Removal

Striker Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk rear plate and trunk rear finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER ".
  2. After removing the cable connection, remove the bolts, disconnect the release cable, and remove the striker from the trunk lock support.
    Fig 1: Trunk Rear Plate Bolts With Torque Specifications
    G04916914Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals