Removal and Installation (Secondary Timing Chain Tensioner Shoe): Installation

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Install new secondary timing chain tensioner shoe using Tool (A) as shown.
- Tighten the bolt until the secondary timing chain tensioner shoe is fully seated on the secondary timing chain tensioner.
  CAUTION: Do not overtighten bolt.
  Tool number : - (J-50246)
Installation of the remaining components is in the reverse order of removal.

Fig 1: Installing New Secondary Timing Chain Tensioner Shoe Using Tool

Courtesy of NISSAN MOTOR CO., U.S.A.