LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Engine Mechanical) >> Service Data And Specifications (SDS) >> Standard and Limit >> Valve >> Valve Lifter

Valve Lifter

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Unit: mm (in)

VALVE LIFTER SERVICE SPECIFICATION

Valve lifter outer diameter 33.977 - 33.987 (1.3377 - 1.3381)
Lifter bore diameter 34.000 - 34.016 (1.3386 - 1.3392)
Clearance between lifter and lifter guide 0.013 - 0.039 (0.0005 - 0.0015)
Fig 1: Identifying Valve Dimensions
G04878530Courtesy of NISSAN MOTOR CO., U.S.A.
VALVE LIFTER THICKNESS SPECIFICATION

Identification Mark Thickness mm (in)
788C 7.88 (0.3102)
790C 7.90 (0.3110)
792C 7.92 (0.3118)
794C 7.94 (0.3126)
796C 7.96 (0.3134)
798C 7.98 (0.3142)
800C 8.00 (0.3150)
802C 8.02 (03.157)
804C 8.04 (0.3165)
806C 8.06 (0.3173)
808C 8.08 (0.3181)
810C 8.10 (0.3189)
812C 8.12 (0.3197)
814C 8.14 (0.3205)
816C 8.16 (0.3213)
818C 8.18 (0.3220)
820C 8.20 (0.3228)
822C 8.22 (0.3236)
824C 8.24 (0.3244)
826C 8.26 (0.3252)
828C 8.28 (0.3260)
830C 8.30 (0.3268)
832C 8.32 (0.3276)
834C 8.34 (0.3283)
836C 8.36 (0.3291)