Removal and Installation: Installation
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is in the reverse order of removal.
- Apply sealant to the areas on the front corners.
- Use Genuine Silicone RTV Sealant or equivalent. Refer to "RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS ".
- Tighten the rocker cover bolts in two stages and in the numerical order as shown
.
Rocker cover bolts
Stage 1 :1.96 N.m (0.20 kg-m, 17 in-lb)
Stage 2: 8.33 N.m (0.85 kg-m, 74 in-lb)