LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Engine Mechanical) >> Drive Belts >> Adjusting Drive Belts >> Tension Adjustment >> Power Steering Oil Pump Belt

Power Steering Oil Pump Belt

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine undercover.
  2. Loosen adjusting bolt (C).
  3. Loosen power steering oil pump bolt (D).
    NOTE: Bolt head (D) is at the engine rear side.
  4. Adjust by turning the adjusting bolt (E).
    • For specified belt tension, refer to "DRIVE BELTS ".
    NOTE: Adjusting bolt (E) is loosened with counterclockwise rotation.
  5. Tighten adjusting bolt (C) to specification.
  6. Tighten power steering oil pump bolt (D) to specification.
    Fig 1: Checking Generator And Air Conditioner Compressor Belt
    G04904573Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals