LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Engine Mechanical) >> Air Cleaner And Air Duct >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector from the mass air flow sensor.
  2. Disconnect the tube clamp at the electric throttle control actuator and at the fresh air intake tube.
  3. Remove air cleaner to electric throttle control actuator tube, air cleaner case (upper) with the mass air flow sensor attached.
  4. Remove mass air flow sensor from air cleaner case (upper), as necessary.
    CAUTION: Handle mass air flow sensor with care.
    • Do not shock it  .
    • Do not disassemble it  .
    • Do not touch its sensor  .
  5. Remove resonator in the fender, lifting left fender protector, as necessary.
scientia non olet · About LEMON Manuals