LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 926 (Audio, Visual, Navigation & Telephone System) >> Telephone >> Removal and Installation >> BLUETOOTH Control Unit >> Removal

BLUETOOTH Control Unit: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove driver seat. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect Bluetooth control unit harness connectors.
  3. Release Bluetooth control unit cover clips (C).
  4. Tip Bluetooth control unit cover rearward, and remove Bluetooth control unit cover.
  5. Remove Bluetooth control unit bracket screws (A).
  6. Remove Bluetooth control unit screws (B).
  7. Remove Bluetooth control unit from brackets.
    Fig 1: Identifying Bluetooth Control Unit Cover Clips And Bracket Screws
    G04918401Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals