Satellite Radio Tuner (Pre-wiring)

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

The satellite radio tuner pre-wiring allows connection of a satellite radio tuner.

Power is supplied at all times

through 20A fuse (No. 31, located in the fuse and fusible link box)
to satellite radio tuner pre-wiring terminal 32.

With the ignition switch in the ACC or ON position, power is supplied

through 10A fuse [No. 6, located in the fuse block (J/B)]
to satellite radio tuner pre-wiring terminal 36.

Ground is supplied through the case of the satellite radio tuner.

Then audio signals are supplied

through satellite radio tuner pre-wiring terminals 21, 22, 23 and 24
to audio unit terminals 41, 42, 43 and 44.