Sunload Sensor
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Measure voltage between unified meter and A/C amp. harness connector M89 terminal 50 and ground.
If NG, replace unified meter and A/C amp. Refer to "UNIFIED METER AND A/C AMP ".
Fig 1: Measuring Voltage Between Unified Meter And A/C Amp. Harness Connector M89 Terminal 50 And Ground
- When checking sunload sensor, select a place where sun shines directly on it.