Checking Discharge Air
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Press MODE switch four times and
(DEF) switch.NOTE: Confirm that the compressor clutch is engaged (sound or visual inspection) and intake door position is at (FRE) when the (DEF) or (D/F) is selected.
- Each position indicator should change shape in display.
- Confirm that discharge air comes out according to the air distribution table. Refer to "DISCHARGE AIR FLOW ".
If NG, go to trouble diagnosis procedure for "MODE DOOR MOTOR CIRCUIT ".
If OK, continue with next check.