LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 923 (Automatic Air Conditioner) >> Refrigerant Lines >> Removal and Installation for Low-pressure Flexible Hose >> Removal

Removal and Installation for Low-pressure Flexible Hose: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
  2. Remove the refrigerant pressure sensor.
  3. Remove the low-pressure flexible hose. Refer to "COMPONENTS ".
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
scientia non olet · About LEMON Manuals