Removal and Installation for Low-pressure Flexible Hose: Installation
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
Low-pressure flexible hose (evaporator side) bolt: Refer to "COMPONENTS ".
Low-pressure flexible hose (compressor side) bolt: Refer to "COMPONENTS ".
Low-pressure flexible hose (in-line connection) bolt: Refer to "COMPONENTS ".
CAUTION:
- Replace the O-ring of the low-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
- After charging refrigerant, check for leaks. Refer to "CHECKING FOR REFRIGERANT LEAKS ".