LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 923 (Automatic Air Conditioner) >> Intake Door Motor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the blower unit. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the two intake door motor screws.
  3. Remove the intake door motor from the blower unit.
    Fig 1: Locating Intake Door Motor Screws
    G04917653Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals