LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Continuously Variable Transmission (CVT)) >> DTC P0740 Torque Converter Clutch Solenoid Valve >> Component Inspection >> Torque Converter Clutch Solenoid Valve

Torque Converter Clutch Solenoid Valve

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect CVT unit harness connector.
  3. Check resistance between CVT unit harness connector terminal and ground.
    RESISTANCE REFERENCE CHART

    Solenoid Valve Connector Terminal Resistance (Approx.)
    Torque converter clutch solenoid valve F30 12 - Ground 3.0 - 9.0 Ω
    Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminal And Ground
    G04916104Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals