LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Continuously Variable Transmission (CVT)) >> CVT Fluid >> Checking CVT Fluid >> Fluid Condition Check

Fluid Condition Check

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
FLUID STATUS REFERENCE

Fluid status Conceivable cause Required operation
Varnished (viscous varnish state) Clutch, brake scorched Replace the CVT fluid and check the CVT main unit and the vehicle for malfunctions (wire harness, cooler pipes, etc.)
Milky white or cloudy Water in the fluid Replace the CVT fluid and check for places where water is getting in.
Large amount of metal powder mixed in fluid Unusual wear of sliding parts within CVT Replace the CVT fluid and check for improper operation of the CVT.
Fig 1: Checking Fluid
G04889110Courtesy of NISSAN MOTOR CO., U.S.A.