LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 921 (Seat Belts) >> Seat Belts >> Removal and Installation of Rear Seat Belt >> Removal

Removal and Installation of Rear Seat Belt: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the rear pillar finisher. Refer to "REAR PILLAR FINISHER ".
  3. Remove the outer anchor and floor anchor bolt.
  4. Remove the rear parcel shelf finisher. Refer to "REAR PARCEL SHELF FINISHER ".
  5. Remove seat belt retractor screw, anchor bolt, and the seat belt assembly.
scientia non olet · About LEMON Manuals