How To Follow Test Groups In Trouble Diagnosis

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Flow Chart For Test Groups In Trouble Diagnosis

Courtesy of NISSAN MOTOR CO., U.S.A.

Work and diagnostic procedure
Start to diagnose a problem using procedures indicated in enclosed test groups.
Questions and required results
Questions and required results are indicated in bold type in test group.

The meaning of are as follows:
1. Battery voltage → 11 - 14V or approximately 12V
2. Voltage: Approximately 0V → Less than 1V
Symbol used in illustration
Symbols included in illustrations refer to measurements or procedures. Before diagnosing a problem, familiarize yourself with each symbol. Refer to "CONNECTOR SYMBOLS " and "KEY TO SYMBOLS SIGNIFYING MEASUREMENTS OR PROCEDURES " below.
Action items
Next action for each test group is indicated based on result of each question. Test group number is shown in the left upper portion of each test group.