LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 916 (SRS Airbag) >> Diagnosis Sensor Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative and positive battery cables, then wait at least 3 minutes.
  2. Disconnect harness connectors for each air bag module and seat belt pre-tensioner.
  3. Remove center console. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  4. Disconnect diagnosis sensor unit harness connectors.
  5. Remove the bolts and the diagnosis sensor unit.
scientia non olet · About LEMON Manuals