LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 915 (Audio, Visual, Navigation & Telephone System) >> Navigation System >> Distance to Empty Displayed is Not Shown (" *** " is Shown)

Distance to Empty Displayed is Not Shown (" *** " is Shown)

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SPEED METER 

    Confirm that speedometer is functioning.

    Is speedometer functioning? 

    Yes: GO TO 2.

    NO: Refer to "VEHICLE SPEED SIGNAL INSPECTION ".

  2. CHECK FUEL METER 

    Confirm that fuel meter is functioning.

    Is fuel meter functioning? 

    Yes: GO TO 3.

    NO: Refer to "FUEL LEVEL SENSOR SIGNAL INSPECTION 1 ".

  3. CHECK CAN COMMUNICATION LINE 

    Check CAN communication line. Refer to "CAN COMMUNICATION LINE CHECK ".

    OK or NG 

    OK: GO TO 4.

    NG: After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO "TROUBLE DIAGNOSIS ".

  4. CHECK COMMUNICATION LINE 

    Check display communication line. Refer to "DISPLAY COMMUNICATION LINE CHECK (BETWEEN DISPLAY CONTROL UNIT AND DISPLAY UNIT) ".

    OK or NG 

    OK: Replace display unit. Refer to "DISPLAY UNIT ".

    NG: Check the malfunctioning parts.

scientia non olet · About LEMON Manuals