LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Exterior & Interior) >> Rear Pillar Finisher >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open trunk lid.
  2. Remove screw in bottom corner of rear pillar finisher.
  3. Using a trim stick, release clips and remove finisher.
scientia non olet · About LEMON Manuals