LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Instrument Panel) >> Instrument Panel Assembly >> Glove Box Assembly and Housing >> Removal

Glove Box Assembly and Housing: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove glove box pins and remove glove box door.
  2. Remove the glove box striker screws using power tool.
  3. Remove glove box housing screws using power tool.
  4. Disconnect trunk cancel switch harness.
  5. Disconnect the glove box and foot well lamps from the glove box housing.
  6. Remove the glove box housing.
scientia non olet · About LEMON Manuals