LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 908 (Lighting System) >> Headlamp (For USA) >> CONSULT-II Function (BCM) >> Active Test >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "HEAD LAMP" on "SELECT TEST ITEM" screen.
  2. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  3. Touch item to be tested and check operation of the selected item.
  4. During the operation check, touching "BACK" deactivates the operation.


  1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
    CONSULT-II SCREEN DISPLAY ITEMS REFERENCE CHART

    Test item CONSULT-II screen display Description
    Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option.
    Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI, LO) at your option (Head lamp high beam repeats ON-OFF every 1 second).
    Front fog lamp relay (FOG) output Allows fog lamp relay (FOG) to operate by switching operation ON-OFF at your option.
    Cornering lamp relay (RH, LH) output CORNERING LAMP Allows cornering lamp relay (RH, LH) to operate by switching operation ON-OFF at your option.
scientia non olet · About LEMON Manuals