Terminal and Reference Value for Main Power Window and Door Lock/Unlock Switch (With Front and Rear Power Window Anti-pinch System)
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 2 | W/B | Limit switch and encoder ground | - | 0 |
| 4 | P/L | Front door lock assembly LH (key cylinder switch) lock signal |
Key position (Neutral → Locked) | 5 → 0 |
| 6 | R | Front door lock assembly LH key cylinder switch) unlock signal | Key position (Neutral → Unlocked) |
5 → 0 |
| 8 | L | Front power window motor LH UP signal | When power window motor is operated UP | Battery voltage |
| 9 | G/W | Limit switch signal | Front power window LH is between fully-open and just before fully-closed position (ON) | 0 |
| Front power window LH is between just before fully-closed position and fully-closed position (OFF) | 5 | |||
| 10 | W/L | RAP signal | When ignition switch ON | Battery voltage |
| Within 45 second after ignition switch is turned to OFF | Battery voltage | |||
| More than 45 second after ignition switch is turned to OFF | 0 | |||
| When front door LH or RH is open or power window timer operates | 0 | |||
| 11 | G | Front power window motor LH DOWN signal | When power window motor is operated DOWN | Battery voltage |
| 13 | G/Y | Encoder pulse signal | When power window motor operates | |
| 14 | Y | Power window serial link | When ignition switch ON or power window timer operates | |
| 15 | G/R | Encoder power supply | When ignition switch ON or power window timer operates | 10 |
| 17 | B | Ground | - | 0 |
| 19 | W/R | Battery power supply | - | Battery voltage |