LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 904 (Brake Control System) >> TCS/Abs >> Wheel Sensors >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire using power tool.
  2. Disconnect wheel sensor harness connector and remove harness wire from attachment points.
  3. Remove wheel sensor bolt and wheel sensor.
scientia non olet · About LEMON Manuals