Information Needed for Trouble Diagnosis
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAN communication system performs trouble diagnosis with the following tools.
CAN COMMUNICATION SYSTEM PERFORMS PERFORMANCE REFERENCE
| Tool | Usage |
|---|---|
| Interview sheet | For filling in vehicle information and interview with customer. |
| Data sheet | For attaching CONSULT-II data or on-board diagnosis data. |
| Diagnosis sheet | For detecting the root cause. (Diagnosis sheet includes system diagram for every CAN system type) |
| SELECT SYSTEM (CONSULT-II) | For checking the condition of control units and the status of CAN communication. |
| SELF-DIAG RESULTS (CONSULT-II) | |
| CAN DIAG SUPPORT MNTR (CONSULT-II) | |
| CAN communication signal chart | For converting information received from a customer into CAN communication signal transmission and reception. This information can be used to judge whether a circuit between control units is normal or abnormal. |
| Abbreviation list | For checking abbreviations in CAN communication signal chart and diagnosis sheet. |