LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (LAN System) >> Can >> Trouble Diagnosis >> CAN Diagnostic Support Monitor >> Driver seat control unit

Driver seat control unit

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

0: Error at present, 1 - 39: Error in the past (Number means the number of times the ignition switch is turned OFF→ON)

DRIVER SEAT CONTROL UNIT REFERENCE CHART

SELECT SYSTEM CAN DIAG SUPPORT MNTR Description Normal Error
PRSNT PAST PRSNT PAST
AUTO DRIVE POS. TRANSMIT DIAG Not used even though indicated
METER/M&A Signal receiving status from the unified meter and A/C amp. OK OK or 1 - 39(1) UNKWN 0
BCM/SEC Signal receiving status from the BCM
TCM Signal receiving status from the TCM
(1) 39 or higher number is fixed at 39 until the self-diagnosis result is erased.