Swinging Force

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before checking the axial forces and end play, turn the lower ball joint at least 10 revolutions so that the ball joint is properly broken in.

Swinging force "A" (measuring from cotter pin hole of ball stud): 7.8 - 54.9 N (0.8 - 5.6 kg-f, 1.8 - 12.3 lb-f)

Fig 1: Checking Axial Forces And End Play

Courtesy of NISSAN MOTOR CO., U.S.A.