LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 897 (Body, Lock & Security System) >> Hood >> Removal and Installation of Hood Assembly

Removal and Installation of Hood Assembly

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Assembly With Torque Specifications
G04916716Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Support the hood with suitable tool.
  2. Separate the hood stays from the hood.
  3. Remove the hood assembly.

    Installation is in the reverse order of removal.

    NOTE: Align the hood. Refer to "FITTING ADJUSTMENT ".
scientia non olet · About LEMON Manuals