LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Continuously Variable Transmission (CVT)) >> Trouble Diagnosis >> Inspections before Trouble Diagnosis >> Stall Test >> Judgement Stall Test

Judgement Stall Test

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
JUDGEMENT STALL TEST

  Selector lever position Expected problem location
"D" "R"
Stall rotation H O
  • Forward clutch
O H
  • Reverse brake
L L
  • Engine and torque converter one-way clutch
H H
  • Line pressure low
  • Primary pulley
  • Secondary pulley
  • Steel belt
O: Stall speed within standard value position.
H: Stall speed is higher than standard value.
L: Stall speed is lower than standard value.
scientia non olet · About LEMON Manuals