Check before Engine Is Started

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT INDICATOR LAMP
1. Park vehicle on flat surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF. Wait at least 5 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Does CVT indicator lamp come on for about 2 seconds?

YES:
1. Turn ignition switch OFF.
2. Perform self-diagnosis and note NG items.
  Refer to "SELF-DIAGNOSTIC RESULT MODE ."
3. Go to "CHECK AT IDLE ."
NO: Stop "Road Test". Go to "CVT INDICATOR LAMP DOES NOT COME ON ".